![](https://ymlowerunit.com/wp-content/uploads/2024/03/98-306-31-150x150.jpg)
SCREW, WATER INTAKE SCREENS
March 9, 2024![](https://ymlowerunit.com/wp-content/uploads/2024/03/98-306-33-150x150.jpg)
WATER SCREEN, 800 SERIES
March 11, 2024FLAT WASHER
$2.99
Description
- Function: The flat washer serves several purposes, including:
- Distributing the load of the fastener over a larger area, reducing the risk of damage to the connected surfaces.
- Preventing the fastener loosening due to vibration or movement by providing a more secure bearing surface.
- Protecting the surface of the connected material from damage caused by the fastener.
- Design: Flat washers are thin, disk-shaped components with a central hole that allows them to be placed over the shaft of a bolt or screw. They typically have a flat, smooth surface on both sides to evenly distribute the load. The inner diameter of the washer matches the diameter of the fastener shaft, while the outer diameter is larger to provide ample coverage.
- Material: Flat washers are commonly made from metal, such as steel, stainless steel, or brass, although they can also be made from plastic or rubber for specific applications. The choice of material depends on factors such as the required strength, corrosion resistance, and environmental conditions.
- Installation: Installing a flat washer involves placing it over the shaft of the fastener before inserting the fastener through the intended hole or opening. The washer sits between the fastener head or nut and the surface of the connected material. Once installed, the fastener can be tightened securely.
- Usage: Flat washers are used in a wide range of applications, including automotive, construction, machinery, and plumbing. They are particularly common in assemblies where a bolt or screw passes through a hole in a structural or mechanical component.
- Maintenance: While flat washers typically require minimal maintenance, it’s essential to ensure they are in good condition during assembly and periodically inspect them for signs of wear or damage. Damaged or worn washers should be replaced to maintain the integrity of the assembly.
Related products
-
GEARCASE, 400 SERIES
$945.00The GEARCASE, 400 SERIES, is a critical component in marine propulsion systems, responsible for transmitting power from the engine to the propeller while providing gear reduction […]
-
GEARCASE V6 4.75 DIAMETER
$945.00The GEARCASE (V6 4.75 DIAMETER) is a critical component of marine propulsion systems, specifically designed for V6 outboard motors with a 4.75-inch diameter. This gearcase houses […]
-
SE308 JOHNSON EVINRUDE LOWER UNIT REPLACEMENT COUNTER ROTATION GEARCASE
$1,295.00The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of […]