SE 305 JOHNSON EVINRUDE LOWER UNIT REPLACEMENT GEARCASE 2.0:1 GEAR RATIO
January 30, 2024
PTT SYSTEM COMPATIBLE WITH JOHNSON EVINRUDE TRIM/TILT SYSTEM 88-225 HP 1988-1998
February 9, 2024
SE 304 REPLACES JOHNSON EVINRUDE LOWER UNIT EARLY MODEL V4 WITH 2.0:1
$1,095.00
This SE304 Gear Case replaces most early style Johnson/Evinrude V-4 Lower Units
from 1978-1998 with a 4-1/8 bullet diameter. The case has internal Water Screens
and a pointed cavitation plate at the rear.
The unit does not include the upper drive-shaft.
If your old unit has a one piece shaft you will need to purchase an upper drive-shaft.
See technical tab for drive-shaft part number.
Or, scroll down to see the optional drive-shafts. Call for assistance if needed.
We use the newer style stub-shaft with a clip.
If your upper shaft is not the newer style you will need to replace it.
Our unit does not include a Water Pump. Please see Water Pump Kit listed below.
Our unit does not include the shift shaft. You will need to reuse your old one and adjust it. You may paint the unit to match your Outboard.
Related products
-
SE308 JOHNSON EVINRUDE LOWER UNIT REPLACEMENT COUNTER ROTATION GEARCASE
$1,295.00The paint color for all lower units is transitioning to black as inventory becomes depleted. Therefore, color may vary depending on product availability at time of […]
-
SE306 JOHNSON EVINRUDE LOWER UNIT V4 LARGE CASE 2.25 RATIO
$1,095.00SE306 Uses the Ocean Pro style water intakes. Comes black as pictured. Does not include Upper driveshaft. If your old unit has a one piece shaft […]
-
DRIVE SHAFT, 25″ 90 DEG. 92-306-04-25A
$150.00The 25-inch 90-degree Drive Shaft, identified by the model number 92-306-04-25A, is a vital component in marine propulsion systems, designed to efficiently transfer power from the […]
