![](https://ymlowerunit.com/wp-content/uploads/2024/01/Johnson-evinrude-lower-unit-5-150x150.jpg)
SE306 JOHNSON EVINRUDE LOWER UNIT V4 LARGE CASE 2.25 RATIO
January 30, 2024![](https://ymlowerunit.com/wp-content/uploads/2024/01/Johnson-evinrude-lower-unit-7-150x150.jpg)
SE 304 REPLACES JOHNSON EVINRUDE LOWER UNIT EARLY MODEL V4 WITH 2.0:1
January 30, 2024
Description
Replaces most later model Johnson V-4 Lower Units from 1995-2006 with a 4-1/8 bullet diameter.
Has external water screens and the rear cavitation plate is flat.
Does not include Upper driveshaft. If your old unit has a one piece shaft you will need to purchase
an upper driveshaft. Please scroll down to see the optional shafts. Call for assistance if needed
We use the newer style stubshaft with a clip. If your upper shaft is not the newer style you will need to replace it.
On 2007 and Newer 115 and 130 HP motors you will need to remove the clips on the driveshaft before installing your shaft into the new unit.
Our unit does not include a Water Pump. Please scroll down to purchase the Water Pump Kit.
Our unit does not include the shift shaft. You will need to install your old one and adjust it.
Our unit does not include the shift shaft. You will need to install your old one and adjust it.